LOCTITE® EA 9450
Known as LOCTITE 9450
Features and Benefits
A 2-part, high-strength adhesive paste that is compatible with a wide array of substrates, such as metals, ceramics and most plastics.
LOCTITE® EA 9450 is a translucent epoxy adhesive (resin and hardener) suitable for a wide variety of substrates, including metals, ceramics, glass and most plastics. It's typically used for component assembly, domestic appliances, electronics, fibre-optics and general industrial repairs. It's non-sagging characteristics make it ideal not just for gap-filling but also for application to vertical surfaces with no run-off . It cures fast at room temperature, leaving slightly flexible, clear bond lines.
- Non-sagging
- Good for general industrial repairs
- Fast curing
- Offers clear bond lines
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Fixture time | 13.0 min. |
| Mix ratio, by volume | 1 : 1 |
| Peel strength, Mild Steel (grit blasted) | 0.6 N/mm |
| Mixed | |
| Pot life, Mixed @ 25.0 °C 10 g mass | 2.0 - 7.0 min. |
| Resin | |
| Viscosity, Brookfield - RVT, Resin @ 25.0 °C Spindle 7, speed 2.5 rpm | 150000.0 - 750000.0 mPa·s (cP) |
| Hardener | |
| Viscosity, Brookfield - RVT, Hardener @ 25.0 °C Spindle 7, speed 20 rpm | 15000.0 - 75000.0 mPa·s (cP) |
LOCTITE® EA 9450
A 2-part, high-strength adhesive paste that is compatible with a wide array of substrates, such as metals, ceramics and most plastics.